Introduction
If you own an Arlo security camera, you may occasionally notice the LED indicator blinking orange. This blinking orange light is your camera’s way of signaling that something needs attention. Whether it’s a connectivity issue, firmware update, or power problem, understanding what this light means is crucial to ensuring your home security system functions optimally. In this article, we’ll guide you through the common causes of an Arlo camera blinking orange, effective troubleshooting steps, and when to contact professional support.
What Does an Orange Blinking Light Mean on Your Arlo Camera?
Arlo cameras use LED indicators to communicate the device’s status. A blinking orange light usually points to one of the following situations:
- Camera Booting Up: When your Arlo camera is starting, it may blink orange momentarily. This is normal and typically resolves within a few minutes.
- Firmware Update in Progress: Arlo frequently releases firmware updates to enhance security, performance, and functionality. During a firmware update, your camera may blink orange to indicate it is installing new software.
- Connectivity Issues: If your camera is unable to connect to the internet or the Arlo base station, it may blink orange. This is often related to Wi-Fi problems or incorrect network settings.
- Battery or Power Issues: Low battery levels or inconsistent power supply can trigger the orange blinking light. Rechargeable Arlo cameras may require a full charge, or a replacement battery might be needed.
- Hardware Malfunction: While less common, persistent blinking orange lights can indicate a hardware malfunction. In such cases, professional support may be required.
Understanding these causes helps you determine the appropriate troubleshooting steps to restore your camera’s functionality.
Troubleshooting Arlo Camera Blinking Orange
If your Arlo camera is blinking orange, follow these troubleshooting steps to resolve the issue:
1. Restart Your Camera
Sometimes, a simple restart can solve connectivity and software issues.
- Step 1: Remove the battery or unplug the camera from the power source.
- Step 2: Wait for 10–15 seconds.
- Step 3: Reinsert the battery or reconnect the camera to power.
- Step 4: Observe if the orange blinking stops and the camera reconnects.
2. Check the Camera’s Firmware
Outdated firmware can cause cameras to malfunction or display warning lights.
- Open the Arlo app on your smartphone.
- Navigate to Settings > My Devices > Camera > Firmware Update.
- If an update is available, follow the on-screen instructions to install it.
- After updating, the orange blinking should disappear once the camera restarts.
3. Verify Wi-Fi Connectivity
Poor Wi-Fi signal or incorrect network settings can prevent your camera from connecting to the internet.
- Ensure your camera is within range of your Wi-Fi router.
- Check your network credentials in the Arlo app.
- Restart your Wi-Fi router if necessary.
- Consider reducing network congestion by disconnecting unnecessary devices.
4. Inspect the Battery or Power Source
If your Arlo camera runs on batteries:
- Remove and recharge the battery fully.
- Replace the battery if it fails to hold a charge.
If it’s a wired camera:
- Ensure the power adapter is functioning correctly.
- Replace any damaged cords or connectors.
5. Factory Reset the Camera
If all else fails, a factory reset may resolve persistent blinking issues.
- Press and hold the Sync button on your camera for about 10 seconds until the LED blinks amber.
- Release the button and wait for the camera to restart.
- Reconnect it to your Arlo system using the app.
Note: A factory reset will erase all settings, so you will need to set up the camera again.
When to Contact Arlo Support
If your camera continues to blink orange after performing all troubleshooting steps, it may indicate a more complex issue, such as hardware failure. In such cases, contacting Arlo technical support is recommended.
You can reach professional Arlo support at +1–872–777–1190. The experts can assist with advanced troubleshooting, firmware issues, and hardware replacements if necessary.
Preventing Arlo Camera Blinking Orange
Once your camera is back to normal, following best practices can reduce future issues:
- Regular Firmware Updates: Keep your Arlo camera firmware updated to avoid software-related problems.
- Stable Power Supply: Ensure batteries are charged and wired cameras are securely connected.
- Strong Wi-Fi Signal: Place cameras within optimal range of your router and reduce interference.
- Periodic System Checks: Regularly check the Arlo app for device status updates and notifications.
By taking these precautions, you can maintain the reliability and efficiency of your Arlo security system.
Understanding Other Arlo LED Indicators
For better troubleshooting, it helps to understand the meaning of other LED colors:
- Solid Green: Camera is fully powered and connected.
- Blinking Green: Camera is in setup mode or connecting to Wi-Fi.
- Blinking Blue: Motion detected, or camera is recording.
- Blinking Orange: Camera is updating firmware, experiencing connectivity issues, or has power problems.
- Solid Red: Critical error or hardware failure.
Knowing these indicators ensures quick identification of issues and faster resolution.
Conclusion
A blinking orange light on your Arlo camera is not an emergency, but it does indicate that attention is required. By following the steps outlined above restarting the camera, checking firmware, verifying Wi-Fi, inspecting power, and performing a factory reset—you can resolve most issues on your own.
However, if the problem persists, professional assistance is always available. Contact Arlo support at +1–872–777–1190 for expert guidance and peace of mind. Remember, maintaining a reliable home security system is crucial for your safety and the protection of your property, and addressing LED warning lights promptly is an essential part of that process.
